View FMMT591_4983535.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FMMT591 Medium power PNP transistor in SOT23
Summary
BVCEO > -60V BVEBO > -7V IC(cont) = -1A PD = 500mW RCE(sat) = 295m at 1A Complementary part number : FMMT491
Description
Medium power planar PNP bipolar transistor.
C
Features
* * VCE(sat) maximum specification reduction Reverse blocking specification improvement
B
E
Applications
* * * MOSFET gate driving Power switches Motor control
E C B
Tape width (mm) 8 Quantity per reel 3000
Ordering information
Device FMMT591TA Reel size (inches) 7
Pinout - top view
Device marking
591
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
1
www.zetex.com
FMMT591
Absolute maximum ratings
Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Continuous collector current(a) Peak pulse current Power dissipation at TA =25C(a) Linear derating factor Operating and storage temperature range Tj, Tstg Symbol VCBO VCEO VEBO IC ICM PD Limit -80 -60 -7 -1 -2 500 4 -55 to 150 Unit V V V A A mW mW/C C
Thermal resistance
Parameter Junction to ambient(a) Symbol R JA Value 250 Unit C/W
NOTES: (a) For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
2
www.zetex.com
FMMT591
Characteristics
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
3
www.zetex.com
FMMT591
Electrical characteristics (at Tamb = 25C unless otherwise stated).
Parameter Symbol Min. -80 -60 -7 -8.1 <1 <1 <1 -155 -295 VBE(sat) VBE(on) hFE 100 100 80 15 Transition frequency Output capacitance fT COBO
300 s; duty cycle
Typ.
Max.
Unit V V V
Conditions IC = -100 A IC = -10mA (*) IE = -100 A VCB = -60V
Collector-base breakdown BVCBO voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cut-off current BVCEO BVEBO ICBO
-100 -100 -100 -180 -350 -1200 -1000
nA nA nA mV mV mV mV
Collector - emitter current ICES cut-off current Emitter cut-off current Collector-emitter saturation voltage Base-emitter saturation voltage Base-emitter turn-on voltage Static forward current transfer ratio IEBO VCE(sat)
VEB = -5.6V IC = -0.5A, IB = -50mA(*) IC = -1A, IB = -100mA(*) IC = -1A, IB = -100mA(*) IC = -1A, VCE = -5V(*) IC = -1mA, VCE = -5V(*)
965 830 220 175 155 40
300
IC = -500mA, VCE = -5V(*) IC = -1A, VCE = -5V IC = -2A, VCE = -5V MHz IC = -50mA, VCE = -10V f = 100MHz VCB = -10V, f = 1MHz(*)
150 10
pF
NOTES: (*) Measured under pulsed conditions. Pulse width
2%.
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
4
www.zetex.com
FMMT591
Typical characteristics
0.6 0.5
+25 C
0.6 0.5
IC/IB=10
VCE(sat) -(V)
VCE(sat) -(V)
0.4 0.3
IC/IB=10
0.4 0.3 0.2 0.1 0
0.2 0.1 0 1mA
IC/IB=50
-55 C +25 C +100 C
10mA
100mA
1A
10A
1mA
10mA
100mA
1A
10A
IC-Collector Current
IC-Collector Current
VCE(sat) v IC
VCE(sat) v IC
400
VCE=5V
IC/IB=10
1.0
h FE - Typical Gain
300
+100 C
V BE(sat) - (V)
0.8 0.6 0.4 0.2
-55 C +25 C +100 C
200
+25 C
100
-55 C
0 1mA
0 10mA 100mA 1A 10A 1mA 10mA 100mA 1A 10A
IC-Collector Current
IC-Collector Current
hFE V IC
1.2 1.0 10
VBE(sat) v IC
VCE=5V
IC -Collector Current (A)
VBE(on) - (V)
0.8 0.6 0.4 0.2 0 1mA 10mA 100mA 1A 10A
-55 C +25 C +100 C
1
0.1
DC 1s 100ms 10ms 1ms 100us
0.01 0.1V 1V 10V 100V
IC-Collector Current
VCE - Collector Emitter Voltage (V)
VBE(on) v IC
VCE(sat) graphs represent MAX limit performance.
Safe Operating Area
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
5
www.zetex.com
Intentionally left blank
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
6
www.zetex.com
Package outline - SOT23
E
e b 3 leads e1
L1
E1
D
A A1 L c
Dim. A A1 b c D e
Millimeters Min. 0.01 0.30 0.085 2.80 Max. 1.12 0.10 0.50 0.20 3.04 -
Inches Min. 0.0004 0.012 0.003 0.110 Max. 0.044 0.004 0.020 0.008 0.120
Dim. e1 E E1 L L1 -
Millimeters Min. 2.10 1.20 0.25 0.45 Max. 2.64 1.40 0.60 0.62 1.90 NOM
Inches Min. 0.083 0.047 0.0098 0.018 Max. 0.104 0.055 0.0236 0.024 0.075 NOM
0.95 NOM
0.037 NOM
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
7
www.zetex.com
FMMT591
Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user's application and meets with the user's requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex' terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: "Preview" Future device intended for production at some point. Samples may be available "Active" Product status recommended for new designs "Last time buy (LTB)" Device will be discontinued and last time buy period and delivery is in effect "Not recommended for new designs" Device is still in production to support existing designs and production "Obsolete" Production has been discontinued Datasheet status key: "Draft version" This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. "Provisional version" This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. "Issue" This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Zetex GmbH Kustermann-park Balanstrae 59 D-81541 Munchen Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 europe.sales@zetex.com Americas Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 usa.sales@zetex.com Asia Pacific Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Telephone: (852) 26100 611 Fax: (852) 24250 494 asia.sales@zetex.com Corporate Headquarters Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 hq@zetex.com
(c) 2007 Published by Zetex Semiconductors plc
Issue 4 - September 2007
(c) Zetex Semiconductors plc 2007
8
www.zetex.com

▲Up To Search▲

Price & Availability of FMMT591

	To Download FMMT591 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .